FieldServer Technologies Video Game Controller 1.1 Manuale Utente
Ruinet Utility User Manual
Page 5 of 46
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
2.
Remote User Interface (RuiNet)
The notes in this section explain how to navigate the menu system provided by RuiNet and
provide information on the contents of the various screens.
provide information on the contents of the various screens.
2.1.
A – Connecting to a FieldServer
Since RuiNet can only work with one FieldServer at a time, it is necessary to target the
FieldServer of interest. (Note that it is possible to run multiple instances of RuiNet at the
same time). If RuiNet is run without specifying a target it will provide a list of the
FieldServers on the network. Pick the required FieldServer from the list -
FieldServer of interest. (Note that it is possible to run multiple instances of RuiNet at the
same time). If RuiNet is run without specifying a target it will provide a list of the
FieldServers on the network. Pick the required FieldServer from the list -
Figure 2.1
If a FieldServer is not selected, RuiNet will automatically connect to the FieldServer last
connected to after about 10seconds.
connected to after about 10seconds.
Type “1“ to pick the first
FieldServer or “2” to
pick the second.
FieldServer or “2” to
pick the second.