Cingular Amzer Smart Keyboard Manuale Utente

Amzer

Keyboard Settings Continued

• Message duration – Length of time the notification message is displayed.

• Test Notification – Used to sample the audible and visual notification settings. Fine

adjustments can be made before leaving the preference property page.

•

[√]

Connect/Disconnect sound –

Enable audio warning that the keyboard
connected or disconnected with driver.

• Sound volume – Adjust the level of the

handset notification sound.

•

[√]

Enable message notification –

Enable visual warning that the keyboard
connected or disconnected with driver.

•

[√]

Automatic brightness control –

Enables automatic backlight control when a
key is pressed on the Professional

keyboard.

• Brightness off time (sec) – To conserve

the handset battery, the handset backlight
can be set to automatically shutoff when
no keys are pressed within the specified

time. The automatic shutoff range is ( 0 –
60 ) seconds.

• Automatic brightness level (%) – Default automatic brightness level. The range

is (10 – 100) percent in increments of 10%. When the backlight is automatically
turned on when a key is pressed it is set to this level.

• Manual brightness adjust (%) – The default Difference level that the backlight

will be set to when the backlight is manually controlled. The range is (10 – 100)

percent in increments of 10%.

Brightness - Manual = Actual Brightness

Example: 100 – 50 = 50

• Manual Control – To adjust backlight brightness manually use the following short-
cut

keys:

[Fn] + [+] Increase Intensity

[Fn] + [-] Decrease Intensity

• KeyPress sound type – Enable/Disable Key Press sound simulation.

• KeyPress sound volume – Adjust the level of the handset key-click sound

simulation.