Cino VERSAJET MP3200 Manuale Utente
Command Descriptions
Programming Reference
VERSAJET MP3200
Data is written to the non-volatile memory by this command. Note the following when
using this command.
using this command.
The printer is BUSY when writing the data to the non-volatile memory. In this case, be
sure not to transmit data from the host because the printer does not receive data.
sure not to transmit data from the host because the printer does not receive data.
Excessive use of this function may destroy the non-volatile memory. As a guideline, do
not use any combination of the following commands more than 10 times per day for
writing data to the nonvolatile memory: FS q, GS ( A (part of functions), GS ( C (part of
functions), GS ( E (part of functions), GS ( L / GS 8 L (part of functions), GS ( M (part
of functions), GS g 0, and FS g 1.
not use any combination of the following commands more than 10 times per day for
writing data to the nonvolatile memory: FS q, GS ( A (part of functions), GS ( C (part of
functions), GS ( E (part of functions), GS ( L / GS 8 L (part of functions), GS ( M (part
of functions), GS g 0, and FS g 1.
176
Preliminary Rev. 02