Chauvet SLIMPAR 56 Manuale Utente

 
 
 
 

Page 4 of 17 

SlimPAR™ 56 User Manual (Rev. 02) 

 

 

 

 

  Keep this User Manual for future consultation. If you sell this product to another user, be 

sure that they also receive this document. 

  Always make sure that the voltage of the outlet to which you are connecting this product is 

within the range stated on the decal or rear panel of the fixture. 

  This product is for indoor use only! To prevent risk of fire or shock, do not expose this fixture 

to rain or moisture. 

  Make sure there are no flammable materials close to the unit while operating. 
  Always install this product in a location with adequate ventilation, at least 20 in (50 cm) from 

adjacent surfaces.  

  Be sure that no ventilation slots on the unit’s housing are blocked. 
  Always disconnect this product from the power source before cleaning it or replacing fuse. 
  Make sure to replace the fuse with another of the same type and rating. 
  If mounting this product overhead, always secure it to a fastening device using a safety 

cable. 

  The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this product at 

higher temperatures.  

  In the event of a serious operating problem, stop using the unit immediately.  
  Never try to repair this product. Repairs carried out by unskilled people can lead to damage 

or malfunction. Please contact the nearest authorized technical assistance center. 

  Never connect this product to a dimmer pack. 
  Make sure the power cord is not crimped or damaged. 
  Never disconnect the power cord by pulling or tugging on the cord. 
  Never carry a fixture from the power cord or any moving part. Always use the 

hanging/mounting bracket or the handles. 

  Always avoid direct eye exposure to the light source when this fixture is on.