Fagor BMF-200X Manuale Utente

6.  Loosen screws used to hold the middle 

hinge and remove middle hinge. Then 
remove the lower door.

9.  Place the refrigerator fl at on the fl oor, 

remove adjustable feet and self-tapping 
screws. Remove the front foot fi xed 
board and lower hinge part.

10. 

Unscrew the lower hinge, change it 
to the opposite side and reattach and 
mount washer.

11. 

Change lower hinge part to the left 
side and front foot fi xed board to the 
right side, then fasten with self-tapping 
screws. Finally install adjustable  feet.

12. Remove the lower door by pulling down 

and align the lower hole site and upper 
hinge axis. Turn the middle hinge piece 
180°, change the washer on the axis to 
the upper side, adjust the middle hinge 
to the appropriate position and then 
reinstall it.

7. Place the lower door on a smooth 

surface facing upwards. Change the 
handle to the right side by following step 
5 described in page 7. Remove the self-
tapping screws, detach the stop block 
and door holder.

 

Turn the door holder 180° and then install 
it and the stop block on the opposite 
side with the self-tapping screws.

8.  Change the screw hole covers on the 

middle cover plate from left to right.

② Special self-t apping screws
③ Handle

① Handle covers

④ Screw hole covers

⑤ Door holder
⑥ Stop block
⑦ Self-t apping screws

1

2

Lower hinge part (left)

② Front foot fixed board

④ Self-t apping screws

③ Adjustable bottom feet part

① Lower hinge part（right）

Note: The washer may 
stick to lower door.

Washer

Note: The washer may 
stick to lower door.

Washer