Canon Wireless File Transmitter WFT-E2 II A Manuale

16

Following the Connection Wizard

 

Turn the <5> dial to select the type of LAN, and 
then press <0>.

 

Select [OK] and press <0> to go to the next 
screen.

Active wireless LAN devices in your area are found and listed.

The [Network] settings screen is displayed. If you have selected a wired network, refer to page 
18, “Configuring Network Settings.” 
Use a Category 5 or higher STP LAN cable. (STP: Shielded Twisted Pair)

Wireless LAN devices are listed with identifying information. Select the SSID (or ESS-ID) of 
your desired wireless LAN device.

 

To select the wireless LAN device, press <0>.

 

Turn the <5> dial to select the wireless LAN 
device, and then press <0>.

 

Select [OK] and press <0> to go to the next 
screen.

1

Indicates whether the device is in infrastructure or ad hoc mode

2

An icon is displayed if the wireless LAN device is encrypting communication

3

Indicates the first 9 characters of the SSID

4

Indicates the channel used

If the wireless LAN device is encrypting communication, select the corresponding method in 
[Authentication] and [Encryption].

 

[Authentication]: Open system, Shared key, WPA-PSK, or WPA2-PSK

 

[Encryption]: WEP, TKIP, or AES

1

2 3

4

COP

Y