Avital 4103 Manuale Utente
23
© 2008 Directed Electronics. All rights reserved.
H2/3
BROWN
(+) BRAKE SWITCH SHUTDOWN WIRE
This wire MUST be connected to the vehicle’s brake light wire. This is
the wire that shows (+) 12V when the brake pedal is depressed. The
remote start will be disabled or shut down any time the brake pedal is
depressed.
the wire that shows (+) 12V when the brake pedal is depressed. The
remote start will be disabled or shut down any time the brake pedal is
depressed.
H2/4
GRAY
(-) HOOD PINSWITCH SHUTDOWN WIRE
This wire MUST be connected to the hood pinswitch. This input will dis-
able or shut down the remote start when the hood is opened.
able or shut down the remote start when the hood is opened.
H2/5
BLUE/WHITE
(-) 200mA 2ND STATUS/REAR DEFOGGER OUTPUT
This wire supplies a 200mA output as soon as the module begins the
remote start process. The H2/5 BLUE/WHITE wire can also be used
to activate the defogger trigger (latched/pulsed) 10 seconds after suc-
cessful remote start. (See the
remote start process. The H2/5 BLUE/WHITE wire can also be used
to activate the defogger trigger (latched/pulsed) 10 seconds after suc-
cessful remote start. (See the
Feature Descriptions
section in this guide
for details about programming this output.)