Avaya 700230253 Manuale Istruttivo

Pagina di 12
20-Type Stand, 
 
200-Type Module Analog (U.S.) 
Adjunct Interface, and 
 
201-Type Module Recorder Interface
 
Installation and Safety Instructions
Comcode: 700230253
555-233-132
Issue 2, July 2006
USA
Important safety instructions
This module can only be connected to a DEFINITY System.
The most careful attention has been devoted to quality standards in the 
manufacture of your new module. Safety is a major factor in the design of every 
set. But, safety is YOUR responsibility too.
Please read carefully the helpful tips listed below. These suggestions will enable 
you to take full advantage of your new module. Then, retain these tips for later 
use.
Warning
This equipment is NOT for residential use. It is for business systems applications 
ONLY.
It will NOT operate on public networks. 
Use
When using your module, the following safety precautions should always be 
followed to reduce the risk of fire, electric shock, and injury to persons.
Read and understand all instructions.
Follow all warnings and instructions marked on the module.
This module can be hazardous if immersed in water. To avoid the possibility 
of electric shock, do not use the module when you are wet. If you accidentally 
drop the module into water, do not retrieve it until you have first unplugged 
the line cord from the modular wall jack. Then, call service personnel to ask 
about a replacement.
Avoid using the telephone during electrical storms in your immediate area. 
There is a risk of electric shock from lightning. Urgent calls should be brief. 
Even though protective measures may have been installed to limit electrical 
surges from entering your business, absolute protection from lightning is 
impossible.
If you suspect a natural gas leak, report it immediately, but use a telephone 
away from the area in question. The telephone’s electrical contacts could 
generate a tiny spark. While unlikely, it is possible that this spark could ignite 
heavy concentrations of gas.
Never push objects of any kind into the module through housing slots since 
they may touch hazardous voltage points or short out parts that could result 
in a risk of electric shock. Never spill liquid of any kind on the module. If liquid 
is spilled, however, refer servicing to proper service personnel.
To reduce the risk of electric shock, do not disassemble this module. There 
are no user serviceable parts inside. Opening or removing covers may 
expose you to hazardous voltages. Incorrect reassembly can cause electric 
shock when the module is subsequently used.
Service
Before cleaning, unplug the line cord. Do not use liquid cleaners or aerosol 
cleaners. Use a damp cloth for cleaning.
Unplug the module and be sure to refer servicing to qualified service personnel 
when these conditions exist :
If liquid has been spilled into the module.
If the module has been exposed to rain or water.
If the module has been dropped or the housing has been damaged.
If you note a distinct change in the performance of the module.
CE mark
The "CE" mark affixed to this equipment means that the unit complies with 
directives located at http://support.avaya.com/elmodocs2/DoC/.
Declaration of Conformity
To download the Declaration of Conformity (DoC) for this equipment, visit 
 
http://support.avaya.com/elmodocs2/DoC/ and click on the link for the 
appropriate terminal.
SAVE THESE INSTRUCTIONS
!
When you see this warning symbol on the product, 
refer to the user guide available from the web for more 
information before proceeding.
For all 2400-Series Telephone documentation, 
go to http://www.avaya.com/support.