Avaya Media Gateway G700 Manuale Utente

b. Log in as craft.

c. At the Linux prompt, type cd /var/home/ftp/pub, and press Enter.

d. The Linux prompt reappears. The current directory has changed to /var/home/ftp/pub.

e. At the Linux prompt, type cp <firmware_filename> /tftpboot, and press Enter to 

copy a single firmware file to the /tftpboot directory. To copy multiple firmware files (most 
firmware files have an .fdl suffix), use the command cp *.fdl /tftpboot.

f. The Linux prompt reappears. The firmware file or files have been copied to the /tftpboot 

directory.

g. Repeat step 4, if necessary, for other firmware files you want to install.

h. At the Linux prompt, type cd /tftpboot.

i. The Linux prompt reappears. The current directory has changed to /tftpboot.

j. At the Linux prompt, type ls, and press Enter.

k. A list of files in the directory appears.

l. Check the directory to make sure the firmware files you want to install are listed.

Conduct the following procedure to compare software versions running on the G700 processors 
and media modules with the versions in you planning documents. If the versions do not match, 
you need to install the new firmware for those components. 

1. At either the P330-1(super)# or P330-1(configure)# prompt, type dir.

The system displays the directory list of software for the P330 stack processor.

2. Check the version number (ver num) of the EW_Archive file to see if it matches the Release 

Letter. 

If not, you must upgrade the P330 stack processor.

M# file 

ver num  file type 

file location 

file description

-- ---- 

-------  ---------- 

------------- 

----------------

1 module-config  N/A 

Running 

Conf Ram 

Module 

Configuration

1 stack-config 

N/A 

Running 

Conf Ram 

Stack 

Configuration

1  EW_Archive

 

4.0.4 

SW Web Image  NV-Ram 

WEB Download

1  Booter_Image

 3.2.5

SW BootImage  NV-Ram 

Booter Image