Autodesk Z800 Manuale Utente

You must configure the following settings to control the converter remotely. Any setting not listed here
either has no effect with the application or can be set through the audio preferences of the application.

ADAT INs: SRC ON
ADAT INs: SMUX OFF

ADAT

AES IN1+2: SRC OFF
AES IN3+4: SRC OFF
AES IN5+6: SRC OFF
AES IN7+8: SRC OFF

AES

IN1+2: SoftClip OFF
IN3+4: SoftClip OFF
IN5+6: SoftClip OFF
IN7+8: SoftClip OFF

Analog
Analog INs: SoftClip

3 is the recommended setting

Clip Detect: 3

Meter

8 is the recommended setting

Route Unit: 8

System
Miscellany

You must configure the following settings to control the converter locally. Any setting not listed here either
has no effect with the application or can be set to any of the values available for it.

ADAT INs: SRC ON
ADAT INs: SMUX OFF

ADAT

AES IN1+2: SRC OFF
AES IN3+4: SRC OFF
AES IN5+6: SRC OFF
AES IN7+8: SRC OFF

AES

IN1+2: SoftClip ON
IN3+4: SoftClip ON
IN5+6: SoftClip ON
IN7+8: SoftClip ON

Analog
Analog INs: SoftClip

set each input channel to a value in
the range -95.5 to +31.5 dB

Analog
Analog INs: Gain

set either -10 or +4 for each output
channel

Analog
Analog OUTs: Level

3 is the recommended setting

Clip Detect: 3

Meter

If these options do not appear, verify that Route Unit
(in the System, Miscellany menu) is set to 8.

For analog audio:
AES INs --> ADAT OUTs
Analog INs --> AES OUTs
AES INs --> Analog OUTs

Route

28 | Chapter 5   Setting Up Audio Hardware