Autodesk Z800 Manuale Utente
Value
Item
Submenu
BIOS Menu
USB Device
<hard drive model>
Hard Drive
Integrated SATA
Disable
Runtime Power Management
OS Power Management
Power
Normal
Idle Power Saving
Disable
MWAIT Aware OS
Disable
ACPI S3 Hard Disk Reset
Disable
SATA Power Management
Hardware Power Management
Disable
Intel Turbo Boost Technology
Enable
Hyper-Threading
Processors
Advanced
Enable
Memory Node Interleave
Chipset/Memory
Disable
NUMA Split Mode
Disable
S5 Wake on LAN
Device Options
Disable
Internal Speaker
Disable
NIC PXE Option ROM Download
Disable
Option ROM Download
Slot 1 PCIe2 x8(4)
Disable
Option ROM Download
Slot 3 PCIe2 x8(4)
Disable
Option ROM Download
Slot 4 PCIe2 x16(8)
Disable
Option ROM Download
Slot 6 PCI32
Updating your System BIOS
The BIOS version installed on your system appears on the screen while booting the workstation. The following
procedure describes how to update a workstation to the certified BIOS version required by your application.
procedure describes how to update a workstation to the certified BIOS version required by your application.
NOTE Before attempting to update the system BIOS, make sure the SATA Emulation option is properly set,
otherwise your optical drive is not detected.
otherwise your optical drive is not detected.
To update the BIOS on your workstation:
1 Download the latest version of the DKU from Autodesk and extract the tar file into a temporary directory.
2 Go to the /Utils/BIOS subdirectory of the DKU directory.
In the BIOS directory there is a subdirectory for each platform supported by the current version of your
Visual Effects, Finishing, and Colour Grading application.
Visual Effects, Finishing, and Colour Grading application.
3 Go to the directory that corresponds to your hardware platform.
44 | Chapter 7 Configuring the Workstation BIOS