Aton DLA6 Manuale Utente
20 ©2008 • All rights reserved.
DLA2/4/6 Speaker Level Audio Router
4. Settings & Operation
Functions of the DLA2/4/6 may be controlled from the Front Panel controls, through optional
IR Receivers connected to the IR INPUTS, or with the optional RF Remote.
IR Receivers connected to the IR INPUTS, or with the optional RF Remote.
Volume Settings
Receiver/Ampl er Volume Settings
Prior to setting volume levels of the DLA2/4/6, proper volume level must be set of the Re-
ceiver/Ampli er. To set proper Receiver/Ampli er volume level:
ceiver/Ampli er. To set proper Receiver/Ampli er volume level:
Turn on the Receiver/Ampli er and start an audio source (CD Player, Radio, etc.).
1.
Adjust the Receiver/Ampli er level to the lowest setting.
2.
Set the Receiver/Ampli er to Stereo and disable any surround sound or DSP
3.
modes
or
“Sound
Fields”.
If using a Receiver/Ampli er with “A/B” speaker outputs, select the “B” speak-
4.
ers and turn off the “A” speakers for maximum output to the DLA2/4/6.
Note: When the DLA2/4/6 is not in use, turn off the “B” speakers and turn on the
“A” speakers for normal operation.
Turn on one room of the DLA2/4/6 and adjust the volume level to maximum.
5.
While listening to the room turned on in the previous step, slowly adjust the re-
6.
ceiver/ampli er volume to the loudest level possible without distortion. Make a
note of the receiver/ampli er level for future reference.
RECEIVER/AMPLIFIER LEVEL
Turn on each room of the system and adjust the volume of the DLA2/4/6 to a
7.
comfortable
level.
Volume Status Bar
The front panel includes a Volume Indicator LED bar with 11 LED’s located above the All On/
Off and Volume -/+ buttons. The Volume Indicator LEDs display the Volume for whichever
Room is selected. When a Room is selected and ONE LED is lit, that room is at minimum vol-
ume. When a Room is selected and
Off and Volume -/+ buttons. The Volume Indicator LEDs display the Volume for whichever
Room is selected. When a Room is selected and ONE LED is lit, that room is at minimum vol-
ume. When a Room is selected and
ALL LEDs are lit, that room is at maximum volume.
Volume Status Bar
Figure 4-1: Volume Status Bar