AT&T DEFINITY Generic 3 Manuale Utente

Basic Call Vectoring

Issue  4 September 1995

The following vector illustrates how vector processing is stopped via the 

stop

 

command.

If the 

stop

 command is reached, the queued caller will continue to hear ringback. 

Also, if the 

stop

 command in Step 5 is executed, Step 6 is not executed 

immediately thereafter. The latter step can be executed only if the 

goto

 command 

in Step 1 succeeds.

Note that an 

implied stop

 follows the last step within a vector. In addition, a 

vector will stop processing whenever 1,000 vector steps have been processed.

Multiple vectors can be chained together to enhance processing capabilities.  In 
this regard, the following points involving two Basic Call Vectoring commands 
should be noted:

■

Route-to number

.  If this command is used to point to a VDN, the following 

happens:

1. Vector processing continues at the first step in the vector assigned 

to the routed-to VDN.

2. Call (if queued) is dequeued.

3. Wait treatment (if any) is disabled.

Processing then continues in the receiving vector at Step 1.

■

Goto vector

.  If this command is used, the following happens:

1. Vector processing continues at the first step in the branched-to 

vector.

2. Call (if queued) remains in queue.

3. Wait treatment (if any) is continued.

Processing then continues in the receiving vector at Step 1.

      1. goto step 6 if calls-queued in split 21 pri m > 10
      2. queue-to main split 21 pri m
      3. announcement 4000
      4. wait-time 30 seconds hearing ringback
      5. stop
      6. busy