ASA Electronics TVR6 Manuale Utente

4.

If Message 1 does not
appear after 30 seconds,
press the remote control’s
SAT

button. Then press

the remote’s PWR button.
The receiver beeps twice,
the Antenna status light begins to flash green,
and the Voltage status light should be lit green.

If the receiver’s Voltage status
light is off, press the power
switch on the front of the
receiver to turn on the
receiver.  

54-0376

Getting Started

To quickly start watching satellite TV using the
TracVision system, follow the simple steps below.

1.

Apply power to the mobile receiver/controller.
The Receiver status light should turn green.

2.

Turn on your TV and select the satellite input (not
the VCR input).

3.

Wait 30-60 seconds for the antenna to acquire the
satellite signal. The TV will show the following:

For details about the status

lights, see Section 10-4,

“System Status Lights” on

page 10.10.