ASA Electronics TVR6 Manuale Utente
10-5
Viewing Diagnostic Information
Follow the steps below to view diagnostics
information on the receiver.
information on the receiver.
1.
Using your primary receiver, press the MENU
button to access the main menu.
button to access the main menu.
2.
Highlight the System Setup tab and press
SELECT.
SELECT.
3.
Highlight the Antenna tab.
4.
Highlight the Diagnostics button and press
SELECT.
SELECT.
Component
Possible States
Receiver State
OK / Error
Antenna State
Idle / Initializing / Searching / Tracking /
Error
Error
Current Sat
Name of satellite the antenna is tracking
RF
OK / Low / Error; Actual RF level
Available Sats
List of installed satellites / Error
Component
Possible States
GPS Position
Current position in latitude/longitude /
Acquiring / Error
Acquiring / Error
Cable
OK / Shorted / Open
System DC
OK / Low / Bad; Actual VDC at receiver
Antenna DC
OK / Error; Actual VDC at antenna
Gyro
OK / Error
10.12
DIRECTV Mobile Receiver/Controller User’s Guide
Antenna
Antenna Controls
Current Settings
Diagnostics
Modify Settings
Sat Select
Receiver State: OK
Antenna State: Tracking
Current Sat: 101
RF: OK; 95
Available Sats: 101, 119
GPS Position: 42.1N 72.3W
Cable: OK
System DC: OK; 11.5
Antenna DC: OK; 30.2
Gyro: OK
If errors, call KVH: 401-847-3327
Antenna State: Tracking
Current Sat: 101
RF: OK; 95
Available Sats: 101, 119
GPS Position: 42.1N 72.3W
Cable: OK
System DC: OK; 11.5
Antenna DC: OK; 30.2
Gyro: OK
If errors, call KVH: 401-847-3327
Antenna
Diagnostics
If the receiver reports an error, please contact
Technical Support for assistance. See Section 10-8,
“Technical Support” on page 10.15.
Technical Support for assistance. See Section 10-8,
“Technical Support” on page 10.15.
54-0376