ARRI 535B Manuale Utente
19
attachment screw
§
into the camera handle
without closing it and push the inserter/antiflicker module
as far to the right as possible. Close the attachment screw
on the camera handle.
as far to the right as possible. Close the attachment screw
on the camera handle.
• Secure the CCD optic module by closing the screw ring
§
clockwise.
4.2.3 Cabeling
• Connect the RS-cable
§
between the inserter/anti-
flicker module and the camera (RS-connectors). It is
recommended to observe the color coding to ensure
that the cable is as close to the camera as possible.
recommended to observe the color coding to ensure
that the cable is as close to the camera as possible.
• Connect the data cable ZV4
§
between the
camera (CCU-connector) and the IVS (data connector).
Without a data cable ZV4 Time-Code and Pull-Down in-
formation as well as data transfer to the IVS via the serial
interface are not available.
formation as well as data transfer to the IVS via the serial
interface are not available.
Note:
If neither time code is used nor data is sent via
the serial interface, it is possible to work without
the data cable ZV4.
the serial interface, it is possible to work without
the data cable ZV4.
attachment screw
inserter/antiflicker module
screw ring
RS cable
data cable ZV4
Setup