ARRI 535B Manuale Utente

SUB MENU

 > FORMAT   1
   POSITION
    EDGE    1
   WHITE
    LEVEL   3
   OUTSIDE  FULL
   EXIT

It is possible to have no format marking (OFF),
format marking number one (1),
format marking number two (2)
or both format markings at the same time (1 & 2)
on display.

If the electronic format markings are not parallel to the
ground glass format markings, readjust the CCD chip
with the alignment screws on the CCD Optic Module
(chapter 5.3).

• Move the cursor > with the keys ß and ü to the line

FORMAT. Pressing the key ä will switch from
OFF to 1 to 2 to 1 & 2 and back to OFF, the
key ö will switch in the opposite direction.

Note:

Pressing the key E

NTER

 I

NSERT

 for more than

three seconds will cause the system to exit the
onscreen programming mode completely,
regardless of which menu is activated, with the
exception of the positioning mode.