Aopen DX34 PLUS Manuale Utente

 

PART NO: 90.50F30.002     DOC. NO: DX34-EG-E0104C 

Ø  Hard Drive IDE Cable x 1 

Ø  Driver CD x 1 

Ø  Norton Anti-Virus CD x1 

Ø  ASM Lite CD x 1 

Ø  IO Bracket for SV320 x 1 

Ø  IO Bracket for Open Market Housing x 1 

Ø  SCSI Utility Diskette Pack x 1 (DX34 Plus) 

Ø  Ultra 160 SCSI 68 pin Cable x 1 (DX34 Plus) 

Ø  CD In Cable x 1 (DX34) 

Ø  Screw Pack x 1 

Ø  User Manual x 1 

Ø  This  Easy Installation Guide x 1 

Plug in the CPU fan cable to the  CPU FAN connector and housing fan cable to the  Housing Fan
connector. For DX34 Plus, we provide two configurations of system fan connector for better compatibility 
with different housing. Please do take care of the type of connector on your motherboard. 

1.  Pull up the CPU socket level and up to 

90-degree angle.

 

2.  Locate Pin 1 in the socket and look  for a 

(golden) cut edge on the CPU upper interface.

 

Match Pin 1 and cut edge. Then insert the 
CPU into the socket.

 

3.  Press down the CPU socket level and finish 

CPU installation.

 

CPU Pin 1 and cut edge 

CPU socket lever 

GND 
+12V 
Sensor 

+12V

 

Fan Off (GND)

 

Fan Fail

 

Sensor

GND 
+12V 
Sensor