Alvarion BREEZEACCESS SW VERSION 5.1 Manuale Utente

Chapter 4 - Operation and Administration 

 

BreezeACCESS VL System Manual

 

4.2.6.2.14.6 Spectrum Analysis Information Display 

The Spectrum Analysis Information Display option enables viewing the results of 
the last analysis process. The displayed information includes the following details 
for each channel: 

„ 

„ 

Signal Count: The number of signals (excluding OFDM frames with the 

correct bandwidth) in the channel. 

„ 

Signal SNR: The average SNR of signals (excluding OFDM frames with the 

correct bandwidth) in the channel. 

„ 

Signal Max SNR: The maximum SNR of signals (excluding OFDM frames with 

the correct bandwidth) in the channel. 

„ 

Signal Width: The average width in microseconds of signals (excluding OFDM 

frames with the correct bandwidth) in the channel. 

„ 

OFDM Frames: The number of OFDM frames with the correct bandwidth 

detected in the channel. 

„ 

OFDM SNR: The average SNR (in dB) of OFDM frames received in the 

channel. 

„ 

OFDM Max SNR: The maximum SNR (in dB) of OFDM frames received in the 

channel. 

„ 

Noise Floor Avg: The average Noise Floor (in dBm) calculated for the channel. 

„ 

Noise Floor Max: The maximum Noise Floor (in dBm) calculated for the 

channel. 

4.2.6.2.14.7 Spectrum Analysis Information Display - Continuous 

The Spectrum Analysis Information Display - Continuous option is available only 
when the analysis process is active. It enables viewing the continuously updated 
results of the current analysis process. The displayed information includes the 
same details available for a regular Spectrum Analysis Information Display 
option. 

4.2.6.2.14.8 Show Spectrum analysis Parameters & Data 

The Show Spectrum analysis Parameters & Data option enables viewing the 
Spectrum analysis test parameters and the last test results.