Alvarion BREEZENET BU-DS.11 Manuale Utente
Installation
2-11
Connecting the Ground and Antenna Cables
The Ground terminal (marked ) is located on the bottom panel of the outdoor
unit. In DS.11D units the antenna’s RF connector (marked
unit. In DS.11D units the antenna’s RF connector (marked
) is located on the
top panel of the outdoor unit.
Figure
2-4: Outdoor Unit Bottom Panel (shown without the service box)
1.
Connect one end of the grounding cable to the Ground terminal and connect
the other end to a good ground connection.
2.
For DS.11D units, connect an RF cable between the antenna connector and
the antenna.
Connecting the Indoor-to-Outdoor Cable
The following steps and figure illustrate how to connect the indoor-to-outdoor
cable. The cable is supplied by Alvarion with an RJ-45 on the outdoor end, with
the other end open to facilitate easy routing through holes to the location intended
for the indoor unit. The cable is supplied together with the waterproof service box.
The kit includes also an O-ring for the service box, an RJ-45 connector and a
connector cover.
cable. The cable is supplied by Alvarion with an RJ-45 on the outdoor end, with
the other end open to facilitate easy routing through holes to the location intended
for the indoor unit. The cable is supplied together with the waterproof service box.
The kit includes also an O-ring for the service box, an RJ-45 connector and a
connector cover.