Alvarion BREEZENET BU-DS.11 Manuale Utente

 

3-4 

Control Window 

The following sections describe how to work with the Control Window. 

Selecting Units 

You can select a unit to manage in one of the following ways: 
♦  Click the Network Autodiscovery button. All the IP addresses of units in the 

same domain but not hidden behind a router (under the selected community) 
are displayed in the list box underneath the button. Click on an address to 
select the corresponding unit for viewing and configuration.  

♦  Type the unit's IP address in the Locate Unit field (for stations which are 

located behind a router) and click

. This will add the unit information to the 

selection list. 

Setting the SNMP Community String 

Type the known Read/Write Community string in the Community field (the default 
string is public for read and private for read/write) and click the 

 button to 

confirm. 

Assigning and Editing IP Addresses Manually (based on 
MAC addresses) 

This section describes how to manually input or modify the IP address of the 
selected unit. 

1. 

Click the Set IP button. The Set IP dialog box appears. 

 

2. 

Type the parameters in the appropriate fields and click OK; the MAC address 

is shown on the bottom label of the indoor and outdoor units. A message box 
is displayed notifying you when the changes are to take affect. This feature 
can be used only if the DS.11 Configuration Utility is on the same Ethernet 
segment as the unit and not behind a router.