Alvarion BREEZENET BU-DS.11 Manuale Utente

 

 

 

3-31 

Resetting the SNMP Community 
Strings 

The SNMP Read/Write Community strings serve as an SNMP security feature to 
restrict management access to authorized persons only.  

To reset the SNMP community strings, insert a paper clip or another suitable tool 
into the Reset button on the top panel of the unit and press the button it for than 
one second at least (see Figure 

2-6 on page 2-13) while the unit is operating. After 

one more second the community strings are reset to the default values, private 
(Read/Write) and public (Read). 

Reloading Factory Default Settings 

 

1. 

Disconnect the power cable from the indoor unit. 

2. 

Insert a paper clip or another suitable tool into the Reset button on the top 

panel of the unit (see Figure 

2-6 on page 2-13). Keep the Reset button pressed 

while inserting the power cable back into its socket. Keep the Reset button 
pressed for at least 3 seconds after reinserting the power cable. After one more 
second the unit will be reset to its factory default configuration.