Alpine DVA-9861Ri Manuale Utente

01GB04DVA9861Ri.fm

ALPINE DVA-9861Ri 68-04123Z62-A (EN)

Do not grip or pull out the disc while it is being pulled back into the 
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is 
off.

Your player accepts only one disc at a time for playback. Do not 
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc. 
“ERROR” will be displayed on your player if you insert a disc 
incorrectly. If “ERROR” continues to be displayed even though the 
disc has been inserted correctly, push the RESET switch with a 
pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in 
skips, but this will not scratch the disc or damage the player.

As a protective measure to prevent the CD from jamming, the CD 
player will automatically eject discs with irregular surfaces or 
inserted incorrectly. When a new disc is inserted into the player and 
ejected after initial loading, using your finger, feel around the 
inside of the centre hole and outside edge of the disc. If you feel 
any small bumps or irregularities, this could inhibit proper loading 
of the disc. To remove the bumps, rub the inside edge of the hole 
and outside edge of the disc with a ballpoint pen or other such 
instrument, then insert the disc again.

Be sure to use round shape discs only for this unit and never use 
any special shape discs.
Use of special shape discs may cause damage to the mechanism.

Make sure the DVA-9861Ri will not be installed in a location 
subjected to:

• Direct sun and heat
• High humidity and water
• Excessive dust
• Excessive vibrations

Do not drop the disc while handling. Hold the disc so you will not 
leave fingerprints on the surface. Do not affix tape, paper, or 
gummed labels to the disc. Do not write on the disc.

Fingerprints, dust, or soil on the surface of the disc could cause the 
CD player to skip. For routine cleaning, wipe the playing surface 
with a clean, soft cloth from the centre of the disc to the outer edge. 
If the surface is heavily soiled, dampen a clean, soft cloth in a 
solution of mild neutral detergent before cleaning the disc.

There are various accessories available on the market for protecting 
the disc surface and improving sound quality. However, most of 
them will influence the thickness and/or diameter of the disc. Using 
such accessories can cause the disc to be out of standard 
specifications and may create operational problems. We 
recommend not using these accessories on discs played in Alpine 
CD players.

01GB00DVA9861Ri.book  Page 5  Wednesday, December 7, 2005  12:00 PM