Algolith XVC-1001-DC Manuale Utente

XVC-1001-DC

Guide to installation and operation

16

The XVC-1001-DC card provides four sources for referencing the outgoing 
video signal. At the bottom of the Card Setup window, the reference 
selection can be chosen from a drop down menu. The reference selection 
is automatically saved and will be restored after power-up.

The XVC-1001-DC accepts tri-level, bi-level and black burst reference 
signals.

The  Reference Selection function allows the user to select from 4 
possible synchronization signals.  

Select from:

Internal Channel 1: Extracts the reference from the channel 1 (input 1) 
video signal. The input 1’s reference signal can be independent from the 
house sync signal and be of a different frame rate.

External 1  (Frame Ref 1): The openGear frame has a distributed 
frame reference, allowing a single incoming reference sync signal to 
feed information to all modules in a frame. External 1 uses the reference 
signal from the openGear frame’s REF 1 input. The XVC-1001-DC’s video 
input 1 must be genlocked with the openGear’s REF 1 input to use that 
selection.

External 2 (Frame Ref 2): External 2 uses the reference signal from the 
openGear frame’s REF 2 input. The XVC-1001-DC’s video input 1 must be 
genlocked with the openGear’s REF 2 input to use that selection.

16