Alesis ANDROMEDA A6 Manuale Utente

Chapter 8: Pre Filter, Post Filter and Voice Mixes

188

A

NDROMEDA 

A6 R

EFERENCE 

M

ANUAL

turn up 

, effectively giving you a “

” input to 

instead of a notch.

- When using 

 as the input to 

, you can invert the bandpass

filtering by pressing the 

 button in the 

 module.

RING MOD Signal Routing
The signal routing of the Ring Modulator has a unique feature that allows you to
bypass the Filters while still routing the 

 signal as in the above examples.

This allows you to hear the filtered and unfiltered Ring Modulator simultaneously.
You can’t do that with the other components of 

.

• To hear the Ring Modulator in its purest form, turn all four knobs in 

 fully counter-clockwise. This turns off all of the 

components going to the Filters.
In 

, press the 

 button located near the bottom of this

module until the LED is off. (If the 

 or 

 LEDs are lit, press

those buttons to turn them off.)  This connects the Ring Modulator’s output to
the 

 knob, bypassing the Filters. Use this knob to control the level of

the unfiltered Ring Modulator signal.
Try pressing the 

 button and assigning 

 to shape the loudness

of the Ring Modulator’s signal, especially if the Filter Envelope is being used
to control the other signals.

• To hear this unfiltered Ring Modulator signal along with filtering, raise the

 control in the 

.  Then follow one of the procedures on

the previous page to route the 

 signal, in parallel, through one or

both of the Filters.