Alfa Romeo 147 Manuale Proprietario

NUMBER PLATE LIGHTS 
(fig. 34)

To change the bulbs, proceed as follows: 

– Work on the transparent cover frame,

in the point shown by the arrow to compress
the catch (

B). Free the opposite end and re-

move the unit. 

– Turn the bulb holder counter-clockwise (

A)

and remove it from the transparent cover. 

– Remove the snap-fitted bulb and replace it. 

– Insert the bulb holder (

A) in the trans-

parent cover then refit the unit checking that
the catch clicks into place (

B).

(fig. 35-36)

To change the bulbs, proceeed as follows: 

– Open the tailgate, slacken the screws

(

A) then disconnect the electric connec-

tion (

B).

– Remove the transparent cover- bulb

holder (

C) from the support (D).

– Working on the side catches (

E), release

the bulb holder. 

– Remove the bulb to be changed.

fig. 34

A0A0171m

fig. 35

A0A0172m

– Disconnect the electric connector (

C).

– Slacken the screw (

D), and remove the

bulb holder. 

– Remove the bulb to be changed push-

ing gently and turning counterclockwise: 

(

E) - bulb for rear sidelight/braking light. 

(

F) - bulb for rear direction indicator. 

– Replace the bulb, then refit the bulb

holder and tighten the screw (

D).

– Re-connect the electric connector (

C).

– Refit the light unit on the body tightening

the screws (

B).

– Close the preformed trim (

A).

fig. 33

A0A0170m

197-233_Alfa147 Q2 GB  4-07-2008  12:04  Pagina 217