Airstream LAND YACHT MOTORHOME Manuale Utente
AIRSTREAM LAND YACHT GAS
MICROTECH™ FILTER
INSTALLATION/REPLACEMENT
1. Install a new filter by wetting the outlet ports with
water and then inserting into the round filter ports on
the faucet head and pushing the filter and head
together. Both outlet ports must be fully inserted into
the filter ports.
2. Install the filter and faucet head assembly on to the
spout by wetting the faucet head o-ring seal and then
carefully sliding the free end of the filter into the spout.
The head will need to be initially turned approximately
½ turn counter clockwise from its normal position to
slip past the safety catch. Lock the head into place by
simultaneously pushing and twisting the head
clockwise. When properly installed the head will feel
secure, and will be correctly oriented on the spout.
3. Reset the filter life indicator by pushing the filter
al use.
our new Moen faucet is now ready for normal use.
o replace filter:
ucet. Remove the faucet head by
ead by two outlet
d
icrotech 400 or 600 filter cartridges with the PureTouch Classic Filtering Faucet system. The
button 3 times. Wait 10 seconds. You should not be
running water while resetting the filter life indicator
because the filter button will remain depressed, with
the first push as it switches to filter mode. The filter
life indicator has been correctly reset if a short series
of rapidly flashing green light occurs, indicating that
the new filter-flushing period has begun.
running water while resetting the filter life indicator
because the filter button will remain depressed, with
the first push as it switches to filter mode. The filter
life indicator has been correctly reset if a short series
of rapidly flashing green light occurs, indicating that
the new filter-flushing period has begun.
4. Flush the filter for 5 minutes before initi
Y
T
1. Turn off the fa
twisting it approximately ¼ turn counter clockwise to
unlock it. Gently pull the faucet head away from the
spout and twist it approximately another ¼ turn to get
the faucet head past the safety catch. The faucet head
and depleted filter (if one is installed) can now be
pulled completely out of the spout.
twisting it approximately ¼ turn counter clockwise to
unlock it. Gently pull the faucet head away from the
spout and twist it approximately another ¼ turn to get
the faucet head past the safety catch. The faucet head
and depleted filter (if one is installed) can now be
pulled completely out of the spout.
2. The filter is held to the faucet h
ports, which connect into the head. Remove the old
filter by simply pulling it straight off. Discard the old
filter and install a new MicroTech 400 or 600 filter.
ports, which connect into the head. Remove the old
filter by simply pulling it straight off. Discard the old
filter and install a new MicroTech 400 or 600 filter.
Note: The faucet will function correctly in unfiltere
stream mode with or without a filter installed. The
faucet will not function correctly in filter mode without a filter. If a filter is not installed and the filter
button in depressed, unfiltered water will flow from both the filtered water outlet and the stream outlet
aerator, and the filter button will not automatically stay depressed.
stream mode with or without a filter installed. The
faucet will not function correctly in filter mode without a filter. If a filter is not installed and the filter
button in depressed, unfiltered water will flow from both the filtered water outlet and the stream outlet
aerator, and the filter button will not automatically stay depressed.
Use only M
Microtech filters are high performance carbon block filters developed specifically for the PureTouch
system.
Microtech filters are high performance carbon block filters developed specifically for the PureTouch
system.
G-13