AEG Protect PV.500-MH PV.500-MH Manuale Utente
Protect PV.500-MH Operating Instructions
20 of 68
80000043212 BAL
3 Product
Details
The equipment has been designed for solar power plants and pro-
vides professional solutions for the use of installations covering
large roofs or in open spaces.
vides professional solutions for the use of installations covering
large roofs or in open spaces.
3.1 Product
Description
The equipment is a solar inverter (INV) that feeds the electrical
energy produced by the PV cells into a medium-voltage mains
(e.g. 10 kV; 20 kV; 33 kV).
The required mains transformer is not supplied with the unit and
can be ordered as an extra if necessary. It is possible to combine
two Protect PV.500 units to create a 1 MW system. A joint isolating
transformer can be used, with an electrically isolated low-voltage
connection for each Protect PV.500. 1 MW systems can be made
to support "partner operation" to increase their efficiency.
The rating plate, featuring all the relevant data, is located on the
inside of the door.
energy produced by the PV cells into a medium-voltage mains
(e.g. 10 kV; 20 kV; 33 kV).
The required mains transformer is not supplied with the unit and
can be ordered as an extra if necessary. It is possible to combine
two Protect PV.500 units to create a 1 MW system. A joint isolating
transformer can be used, with an electrically isolated low-voltage
connection for each Protect PV.500. 1 MW systems can be made
to support "partner operation" to increase their efficiency.
The rating plate, featuring all the relevant data, is located on the
inside of the door.
Figure 2
PV.500 equipment
i
Important information about equipment documenta-
tion
Further descriptions and unit diagrams are included in the
tion
Further descriptions and unit diagrams are included in the
document folder.