Adtran MP-114 Manuale Utente
Quick Installation Guide
3. Configuring the MediaPack
Version 5.0
35
September 2007
3.3.2.12 Defining Channel Select Mode
Channel select modes determine the method in which new IP-to-Tel calls (i.e., calls from OCS
clients to PBX/PSTN phones) are assigned to gateway ports (i.e., channels). It is recommended
to select the Cyclic Ascending mode, which selects the next available channel in an ascending
cycle order.
clients to PBX/PSTN phones) are assigned to gateway ports (i.e., channels). It is recommended
to select the Cyclic Ascending mode, which selects the next available channel in an ascending
cycle order.
¾
To define the Channel Select mode, take these 3 steps:
1.
Open the 'General' screen (Protocol Management menu > Protocol Definition > General
Parameters
Parameters
).
Figure 3-22: General Screen
2.
From the 'Channel Select Mode' drop-down list, select 'Cyclic Ascending'.
3.
Click the Submit button to save your changes.
2