Acnodes EPSON PERFECTION 1200S Manuale Utente

11

Set the SCSI ID Number

The scanner is preset at the factory to SCSI ID 2. If you need to change this number, 

turn the scanner off. Then use the tip of a small flathead screwdriver to turn the rotary 

switch on the back panel. Be sure to choose a unique number that doesn’t conflict 

with the ID number of other SCSI devices (including the SCSI interface board itself, 

which is usually ID 7).

Don’t use SCSI ID 8 or 9 for your scanner; these are for 

factory use only. 

If you’re installing either of the scanner options, see “Transparency Unit” on page 67 

or “Auto Document Feeder” on page 73.