Acnodes EPSON PERFECTION 1200S Manuale Utente

44

Placing Your Original Document

Placing the original document on the scanner correctly is very important. Follow 

these steps:
1. Raise the scanner cover and place 

your document face down on the 

document table glass. If you’re 

scanning a transparency, the 

optional transparency unit should 

be installed and turned on.

2. Position the document so the 

horizontal and vertical edges are 

carefully aligned with the scales 

on the top and right side of the 

document table.

3. Close the scanner cover slowly. Be careful not to move the document.

The self-adjusting scanner cover allows you to place thick 

documents on the document table glass without removing the 

cover. But if your document is too thick to fit under the cover, 

you can remove the cover as described on page 62.

Selecting TWAIN from Your Application

Once the document is placed on the scanner and the scanner is turned on, you can 

start EPSON TWAIN to capture the image into your graphics application.
Follow these steps to start EPSON TWAIN from your application software (the steps 

may vary, depending on your application): 
1. Start your application software by selecting the program icon in its program 

folder.

corner of the 

document