Acnodes EPSON PERFECTION 1200S Manuale Utente

64

Cleaning the Scanner

To keep your scanner operating at its best, you should clean it periodically. Before 

cleaning, unplug the power cord.
Use a soft cloth to clean the outer case with mild detergent dissolved in water.
If the document table glass gets dirty, clean it with a soft, dry cloth. If the glass is 

stained with grease or other hard-to-remove material, use a small amount of glass 

cleaner on a soft cloth to remove it. Wipe off any remaining liquid with a dry cloth.
Be sure there’s no dust on your document table. Dust can cause white spots to appear 

in your scanned image.

Never use a harsh or abrasive brush or cleaning product to 

clean the document table. A damaged glass surface can 

decrease the scanning quality.

Never use alcohol, thinner, or corrosive solvent to clean the 

scanner. These chemicals can damage the scanner 

components as well as the case.

Be careful not to spill liquid into the scanner mechanism or 

electronic components. This could permanently damage them.

Never open the scanner case. Don’t spray lubricants inside 

the scanner. If you think repairs or adjustments are necessary, 

consult your dealer or contact EPSON.

Cleaning the Paper Path Guide

If you are using the optional auto document feeder (ADF) and you notice the quality 

of your scans have declined, or you simply want to keep the quality of your scans at 

their best, clean the paper path guide.
Follow the instructions below to remove, clean, and reattach the paper path guide.