Acnodes EPSON PERFECTION 1200S Manuale Utente

81

Problems and Solutions

If you’re having problems, this section answers some of the most common questions. 

Setup Problems

If your system doesn’t recognize 

the SCSI board (Windows 

only) . . .

■

Check the Plug and Play option 

for your computer; it should be 

turned on.

■

Make sure the SCSI board is 

installed correctly. If it isn’t 

seated firmly in the PCI slot, the 

computer may not recognize it.

If your system doesn’t recognize 

the scanner . . .

■

Make sure your scanner is turned 

on. If you opened your host 

application before you turned on 

your scanner, close your 

application and reopen it.

■

Check the Plug and Play option 

for your computer; it should be 

turned on.

■

Make sure the SCSI board is 

installed correctly (see the 

previous section).

■

If the SCSI board is found, but 

not the scanner, check the SCSI 

terminator and ID. Make sure 

the SCSI ID is not conflicting 

with another SCSI device.

■

Check the SCSI cable connection 

or try using another SCSI cable.

■

If you get the message, “No push 

button scanner found,” turn off 

your scanner, shut down your 

computer, turn on your scanner, 

and then turn on your computer.

Scanner Problems

If the operate light doesn’t 

come on or blinks slowly . . .
Check the scanner power cord. 

Make sure the power cord is securely 

plugged into the power outlet, and 

that the scanner is turned on. Also, 

check that the power outlet is 

working and provides sufficient 

power for the scanner.