Acer 700 Series Manuale Utente
4-2
AcerRouter 700 Series User Guide
phone number. If a AcerRouter 700 and any device that supports this “sub-
addressing” feature calls each other using this feature (by first dial the main telephone
number, then press “*” followed by the extension number), the call can be directly
routed to the corresponding extension. For example, if a remote caller with an ISDN
phone dials your ISDN number followed by a “*” and the extension number for port
A, only the phone that is connected to port A will ring.
addressing” feature calls each other using this feature (by first dial the main telephone
number, then press “*” followed by the extension number), the call can be directly
routed to the corresponding extension. For example, if a remote caller with an ISDN
phone dials your ISDN number followed by a “*” and the extension number for port
A, only the phone that is connected to port A will ring.
The following describes the steps necessary to configure your AcerRouter 700 for
proper phone and fax operation.
proper phone and fax operation.
Step 1
Select Voice Adapter from the SMART menu:
Configuration - WAN Interfaces - Voice Adapter
Step 2
Enter the following information:
ISDN B1/B2 Directory Number: These are the two phone numbers your
ISDN service provider (i.e., your phone company) assigns to you.
ISDN service provider (i.e., your phone company) assigns to you.
If your ISDN service provider offers a third ISDN Directory number, this
can be configured from the Command Line Interface.
can be configured from the Command Line Interface.
A call will ring ...: you can select any combination of phones to ring when
a call is received.
a call is received.
Voice Port A, B or C extension Number: this is a 1-8 digit number. In
the example shown below, extension 11, 22, and 33 have been assigned to
port A, B and C respectively. An extension number must be entered for
each voice port. However, the use of a number beginning with a zero is not
allowed.
the example shown below, extension 11, 22, and 33 have been assigned to
port A, B and C respectively. An extension number must be entered for
each voice port. However, the use of a number beginning with a zero is not
allowed.
Voice port A extension number
Voice port B extension number
Voice port C extension number
Port Configuration
Voice Adapter
ISDN-B1 directory number
ISDN-B2 Directory Number
Ring Phone(s)
When a voice call is received on B1
A call will ring
Voice port A
Voice port B
Voice port C
Ring Phone(s)
A call will ring
Voice port A
Voice port B
Voice port C
When a voice call is received on B1
11
22
33
APPLY