Acer imedia S3811 Manuale Utente

Integrated Peripherals

his page sets up some parameters for peripheral devices connected to the system.

CMOS Setup Utility

Integrated Peripherals

Item Help

Onboard SATA Controller

Enabled

Onboard SATA Mode

AHCI

Options

Onboard USB Controller

Enabled

Legacy USB Support

Enabled

Disabled

USB Storage Emulation

Onboard Graphics Controller

Onboard Audio Controller

Auto

Disabled

Enabled

Onboard LAN Controller

Enabled

Onboard LAN Option ROM

Disabled

↑↓→←：

Move Enter：Select +/-/：Value F10：Save & Exit Setup

Esc： Exit F1：General Help F9：Load Default Settings

OnBoard SATA Mode (AHCI)

Use this item to select the onboard SATA mode.

OnBoard SATA Controller (Enabled)

This item allows you to enable or disable the onboard SATA controller.

OnBoard USB Controller (Enabled)

Use this item to enable or disable the use of USB controller.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect
the presence of USB device at startup. If detected, the USB controller legacy mode is enabled. If no USB device
is detected, the legacy USB support is disabled.

USB Storage Emulation (Auto)

If Auto, USB device equal or less than 2GB will be emulated as Floppy and remaining as hard drive. Forced
FDD option can be used to force a HDD formatted drive to boot as FDD (Ex.ZIP drive).

Onboard Audio Controller (Enabled)

This item enables or disables the onboard audio controller.

Onboard LAN Controller (Enabled)

Use this item to enable or disable the Onboard LAN.

Onboard LAN Option ROM (Disabled)

This item enables or disables the onboard LAN option ROM function.

Press <Esc> to return to the main menu setting page.