ABL electronic Scamax 2600 Manuale Utente

 

Note: Using the normal endorser counter %U when the Patchcode Controlled Index is also in use is 
not recommended. This is because the endorser counter uses the same resources as Counter A.  

The buttons to load and to save the settings and the button for the rules are located on the right side 
of the Parameter Configuration dialog. 

 

All settings for search, count, and output, as well as all rules can be summarized as one mode and 
can be stored as a JuK Mode Definition ("*.JMD" file). There is no limit in defining and storing different 
modes, nor is there a restriction for definition and saving different modes. A certain number of such 
configurations, 15 with an Admis S31 scanner, can be stored directly in the scanner itself, as seen in 

The current mode can be stored as a *.JMD file and can later be reloaded as the current mode, using 
the Save and Load buttons. 

 

It is useful to define modes for recurrent tasks or documents, to store them on a network drive, and to 
load the required one to their respective workstations. 

Pressing the button Rules, as seen in 

, opens up the dialog for the Index 

control of the currently selected mode. 

Page 32 of 42