AAMP of America PXDX-KD Manuale Utente

Chapter 1- 

Getting Started

1.1 Introduction

Thank  you  for  purchasing  Peripheral  Electronics’®  Audio2car  interface.  The 

Audio2car is designed to provide endless hours of listening pleasure through most 

vehicles’ factory radios. To ensure that your Mobile Device performs correctly in 

your car or truck, we recommend that you read this entire manual before attempting 

installation of the Audio2car interface

.

The Audio2car interface will allow you to connect your Mobile Device to a factory 

radio that has the ability to control a CD changer. The Audio2car is designed to be 

used with all iPods, mp3 players, portable DVD players, video game systems and 

any other portable device with traditional audio outputs. 

1.2 Precautions

 

(Important, Please Read)

To eliminate the risk of an electrical short, we recommend disconnecting the car 

battery in most vehicles, except in the following situations:

 Vehicles equipped with on-board navigation should not have the car’s battery          

   disconnected. Doing so may cause loss of memory settings. These settings         

   would then have to be reprogrammed by an authorized car dealer for a fee to    

   be paid by the vehicle’s owner. For these vehicles, we recommend extreme 

   caution when handling exposed 12V power or ground wires/connectors. 

Vehicles that incorporate a security-code protecting the radio. If the car’s battery  

  or the radio’s power plugs are disconnected, the radio will not operate without         

  re-entering the security-code. If you have access to the security-code, feel 

  comfortable disconnecting the battery and the radio’s power connectors. Other    

  wise, do not disconnect the battery and exercise extreme caution while handling     

  exposed 12V power or ground wires/connectors.

Securely install the interface in a location free from; heat, humidity, moving parts or 

direct sunlight.  Beware of hot-air flow from your vehicle’s climate control system.  

We recommend securing the interface to a suitable location, free of sharp metal 

edges, using; double sided tape, Velcro or wire ties.

1