Dot Hill Systems II 200 FC Manuale Utente

Appendix G Configuring a Linux Server G-5

12. Press Escape until a screen is displayed that says “Configuration setting modified.” 

Highlight Save changes and press Return.

13. Return to the Fast!UTIL Options. Highlight Scan Fibre Devices and press Return. 

This menu option scans all 126 channels to see if there are any devices attached; the 
devices are displayed after the scan. If there are no devices attached, it takes some time 
to scan. If there are devices attached, the scan usually finds them right away.

14. If you are satisfied with the configuration, press Escape until you get to 

. 

15. Highlight Exit Fast!UTIL and press Return.

A screen is displayed that says Exit Fast!UTIL.

16. Highlight Reboot System and press Return.

The server reboots.

G.4

Multiple LUN Linux Configuration

By default, the Linux kernel does not support multiple LUNs. To support multiple 
LUNs, modify the kernel with the following steps:

1. Log in as root, or become a superuser if you are logged in as a user.

2. Add this line to the end of the /etc/modules.conf file and save the file: 

3. At the system prompt, enter this command and press Return:

The 2.4.9-e.3 entries refer to the current kernel. To find out your current kernel, type 
uname -r 

and substitute your kernel information in place of the 2.4.9-e.3 entries. 

4. Reboot the server. 

■

To halt the server completely, use shutdown -h now. 

■

To reboot automatically after the shutdown is complete, use shutdown -r now. 

G.5

Making an ext3 File System for Linux

The following procedure for labeling and partitioning drives using fdisk applies to an 
ext3 file system. To discover which disk you want to label, you need to determine what 
device it is.