Dixon Aficio 1515 Manuale Utente
![Dixon](https://files.manualsbrain.com/attachments/c64546a1da5c1ce28fe28b3b1506b329890cf5b6/common/fit/150/50/785f41662577619992641fdeaabb23bde3e14941839be39077c146cb0361/brand_logo.gif)
Faxing
10
2
Important
❒ If power outage lasts about an
hour, or the machine is discon-
nected from the power outlet
for about an hour, documents
stored in the fax machine's
memory are deleted. If any doc-
ument is deleted, the Power
Failure Report is automatically
printed out when the main
power switch is turned on. Use
this report to check which docu-
ments were deleted. Simply
turning off the power by press-
ing the Operation switch does
not delete stored documents.
See p.96 “Turning Off the Main
Power/In Case of a Power Fail-
ure”, Facsimile Reference <Ad-
vanced Features> .
nected from the power outlet
for about an hour, documents
stored in the fax machine's
memory are deleted. If any doc-
ument is deleted, the Power
Failure Report is automatically
printed out when the main
power switch is turned on. Use
this report to check which docu-
ments were deleted. Simply
turning off the power by press-
ing the Operation switch does
not delete stored documents.
See p.96 “Turning Off the Main
Power/In Case of a Power Fail-
ure”, Facsimile Reference <Ad-
vanced Features> .
Switching between Memory
Transmission and Immediate
Transmission
Transmission and Immediate
Transmission
Check the indicators on the operation
panel to check which mode is current-
ly active and press the
panel to check which mode is current-
ly active and press the
{{{{Memory
Trans.
}}}} key to toggle between them.
Note
❒ You can select the transmission
mode (Memory Transmission or
Immediate Transmission) that is
operative when the machine is
turned on or when the
Immediate Transmission) that is
operative when the machine is
turned on or when the
{{{{Clear
Modes
}}}} key is pressed, using [Home
Position]
under [Key Operator Tools].
See p.81 “Home Position”, Facsimi-
le Reference <Advanced Features>
(switch 02, bit 2).
le Reference <Advanced Features>
(switch 02, bit 2).
❒ You can have the machine return
to the status obtained by pressing
the
the
{{{{Clear Modes}}}} key after each
transmission using [Home Position]
under [Key Operator Tools]. See p.81
“Home Position”, Facsimile Refer-
ence <Advanced Features> (switch
01, bit 7).
under [Key Operator Tools]. See p.81
“Home Position”, Facsimile Refer-
ence <Advanced Features> (switch
01, bit 7).
ABZ003S
StellaC2-GBcombine-F_FM_ZF.book Page 10 Wednesday, November 26, 2003 5:04 PM