Digimate DGL2700 Manuale Utente

 

Press POWER to turn on the LCD Display. The power indicator changes from red to green. 
When the power is off, the power indicator changes from green to red. 

Press SOURCE to select the input signal. Each time the SOURCE is pressed, the on-screen 
display will cycle through the different sources that are supported by the device. There are 8 
sources are supported: TV, AV1, AV2, AV3, S-Video, YPbPr1, YPbPr2 and VGA. 

Switches directly to TV mode. 

Press 

f

 on the remote control to increase the volume. Press 

e

 to decrease the volume. 

Press c or d to tune channels Up or Down.  Press c to go to the next channel or d to go to 
the previous channel. You can also use the number keypad to select the channel you want to 
watch. After you have chosen the channel, press 

 to directly tune to the specified channel. 

Press MENU to open/close the menu. Use d/c to navigate and select the item on the main 
menu. Press ENTER to go into the submenu then use e and f to adjust the settings.  

Open the OSD menu to access the various settings for your LCD Display. Some basic 
operations when using the OSD menu include: 
y

 Press 

MENU to open the OSD menu, use e / f to select the different options in the sub 

menu   

y

 Use 

c / d to scroll through the options in the submenu and press ENTER to confirm the 

setting; the “

ˇ

” sign will be shown on the right of the option after your confirmation.  

y

 Use 

e / f to adjust the bar setting to preferable level in the sub menu, press MENU to 

return to OSD menu. 

y

 

After confirming the settings, press e to go back the upper level of OSD menu. 

y

 Press 

MENU again to exit the current OSD menu.