Digidesign Control 24 Manuale Utente

Appendix B: Utility Functions

The UTILITY functions let you configure opera-
tional aspects of Control|24, and to perform di-
agnostic tests on surface components. 

To enter the UTILITY menu:

1  

Press the UTILITY switch (located directly 

above the MASTER FADERS switch). 

2  

The text label “Util menu” is displayed in the 

dual 4-character scribble strip displays in the 
CHANNEL BAR.

The channel scribble strips, beginning with dis-
play the UTILITY menu items. The main menu 
items in this mode include:

• Sys Info

• Monitor

• Name

• Test

• GPIs

• Sys reset

• Exit

The encoder switch located below each UTILITY 
menu choice activates the menu and the switch 
LED will flash to indicate this. 

To exit UTILITY mode:

■

Press the flashing encoder switch that corre-

sponds to the “Exit” choice, or press the flashing 
UTILITY switch. 

Editing Parameters on UTILITY 
Pages

When editing parameter choices on the UTIL-
ITY pages, you can make menu choice changes 
as follows:

• The encoder switch below the display associ-

ated with the parameter will be lit solid if the 
default choice is enabled.

• Other choices which are available in the 

menu but are not currently engaged (on) will 
flash the encoder switch LED located below 
the choice.

• A new choice can be made by pressing the 

flashing encoder switch associated with the 
parameter of choice. This action will lock in 
the new choice, the encoder switch LED will 
light solid and the previous assigned choice 
encoder switch LED will begin to flash along 
with any other currently unassigned choices.

• The scribble strip display to the right of all 

available menu choices is the “Exit” switch, 
which can be pressed at any time to exit the 
current menu and will return Control|24 to 
the previous state.