Digidesign Control 24 Manuale Utente

Ethernet Connections

Control|24 communicates with Pro Tools using 
Ethernet. This connection uses a standard RJ45, 
10Base-T connector. 

If Control|24 is the only Ethernet device 
connected to your computer:

1  

Connect one end of the included crossover 

Ethernet cable to the Ethernet port on the back 
panel of Control|24. 

2  

Connect the other end of the cable to the ap-

propriate Ethernet port on the computer. 

If you have more than one Ethernet device in 
addition to Control|24:

1  

Connect one end of a standard Ethernet cable 

(not included) to the Ethernet port on the back 
panel of Control|24. 

2  

Connect the other end of the cable to the ap-

propriate Ethernet port on a powered Ethernet 
hub. 

Installing Control|24 Ethernet Drivers

(Windows XP Only)

Windows systems require drivers for Ethernet 
communication with Control|24. With 
Pro  Tools 7.1.x and lower, you must install these 
drivers manually. 

To install Digidesign Ethernet drivers for 
Control|24:

1  

Click Start, right-click My Network Places, and 

then choose Properties. 

2  

Right-click the relevant Local Area Connec-

tion icon, and then choose Properties. 

3  

Click Install, select Protocol, and click Add.

4  

Click Have Disk.

5  

Select the DigiNet.inf file in the Control|24 di-

rectory (on your Pro Tools Installer disc in Addi-
tional Files\Controllers\Controllers), and click 
OK. 

The Installer installs the DigiNet.inf files in the 
Control|24 directory in Digidesign\DAE\Con-
trollers.

6  

Click Close.