Digidesign Control 24 Manuale Utente

Shortcuts employing the MASTER REC switch:

• Press MASTER REC to record-enable all audio 

tracks.

• While pressing APPLY TO ALL SELECTED 

CHANNELS or SHIFT/ADD, press 
MASTER REC to enable all currently selected 
audio tracks.

• While pressing OPT(ALT)/ALL, press 

MASTER REC to enable all MIDI tracks.

• While pressing OPT(ALT)/ALL+SHIFT/ADD, 

press MASTER REC to enable all currently se-
lected MIDI tracks.

By default, pressing MASTER REC once will take 
all channels out of record-ready if any tracks are 
armed. Pressing MASTER REC a second time will 
place all channels into record-ready mode. 

When at least one track is record-enabled, press-
ing MASTER REC disables record for all tracks.

For more information about Recording func-
tions, see Chapter 11, “Recording.”

DEFAULT QuickMode Switch

This switch reverts a control to its default set-
ting, and is equivalent to pressing 
OPT(ALT)/ALL and clicking an on-screen con-
trol in Pro Tools. 

To reset a fader to its default setting: 

■

Press DEFAULT+any channel SELECT switch. 

To reset all faders or encoders to their default 
setting:

■

While pressing DEFAULT+APPLY TO ALL 

CHANNELS, press any channel’s SELECT switch. 

To reset all selected faders or encoders to their 
default setting:

■

While pressing DEFAULT+APPLY TO ALL SE-

LECTED CHANNELS, press any channel’s SE-
LECT switch. 

To remove a selected plug-in:

■

In Insert Assign mode, while pressing DE-

FAULT, press the encoder switch beneath a plug-
in’s name to remove it.

COPY SETTINGS FROM 
CHANNEL and PASTE SETTING 
TO CHANNEL

Settings can be copied from one instance of a 
plug-in and pasted into another with dedicated 
command switches from Control|24.

To copy the settings from the current Target plug-
in:

■

Press COPY SETTINGS FROM CHANNEL.