Dexion DEEPSTOR DEIVE-IN PALLET RACKING Manuale Utente

 

 

 
 

ISSUE 1 

 

 

AUGUST 2003

 

 

Page 9 

 

The fork lift truck must be of a suitable design and capacity, capable of lifting the loads to the 
heights required. If there are any doubts regarding its capacity reference should be made to the 
relevant manufacturer or supplier. 
 

The truck must be capable of lifting the pallet clear of the top storage level by at least 100mm. 
 
 

The forks should be of sufficient length to support all the boards, but not extend beyond the pallet 
(refer to right-hand side figure for correct fork length) 

 
 

All fork truck drivers should be suitably trained and licensed in the operation of the handling 
equipment. Secondly they should trained in the use of this type of storage system and have a copy 
of these guidelines available to them. 
 
 

The USER is responsible for ensuring that the handling equipment is driven carefully at all times to 
avoid any collision with or damage to the rack structure 
 
 

The following sections of guidelines cover the use of the system, and how to load and unload the 
racking.  
Following these recommendations and procedures, i.e. pallet inspection, correct pallet placement, 
and alignment will all help the efficiency and smooth operation of the system helping to prevent 
problems. 
Adversely, harsh treatment or abuse will soon lead to damage, and a reduction in system reliability 
and performance, and in extreme cases render the structure unsafe. 
 
For the benefit of the system and personnel “Prevention is better than cure”.