Cirkuit Planet MH-1000 Manuale Utente

Multi-Homing Security Gateway User’s Manual 

 

The Device Management Advanced Configuration settings allow you to control your router’s security 

options and device monitoring features. 

 

 

Name: Enter a name for this device. 

 This is the port number the router’s embedded web server (for web-based configuration) will 

use. The default value is the standard HTTP port, 80. Users may specify an alternative if, for example, they 

are running a web server on a PC within their LAN. 

 You may specify an IP address allowed to logon and access the router’s web 

server. Setting the IP address to 0.0.0.0 will disable IP address restrictions, allowing users to login from any 

IP address. 

 Specify a time frame for the system to auto-logout the user’s configuration session. 

 

 User A changes HTTP port number to 100, specifies their own IP address of 192.168.1.100 and 

sets the logout time to be 100 seconds. The router will only allow User A access from the IP address 

192.168.1.100 to logon to the Web GUI by typing: http://192.168.1.1:100 in their web browser. After 100 

seconds, the device will automatically logout User A. 

 

After changing the router’s configuration settings, you must save all of the configuration parameters to flash 

memory to avoid them being lost after turning off or resetting your router. Click Apply to write your new 

configuration to flash memory. 

 

 

 

 

- 80 -