D-Link DSL-2750B Manuale Utente

92

DSL-2750B User Guide

•  Click on Start > Run. In the run box type cmd and click OK.

•  At the prompt, type ipconfig and press Enter.

•  This will display the IP address, subnet mask, and the default 

gateway of your adapter.

• Click Start, type cmd in the search box and then click OK.

•  At the prompt, type ipconfig and press Enter.

• This will display the IP address, subnet mask, and default 

gateway of your adapter.

If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. 

Some firewall software programs may block a DHCP request on newly installed adapters.

•  Press the Windows key and R together. Type cmd in the box 

and click OK.

•  At the prompt, type ipconfig and press Enter.

• This will display the IP address, subnet mask, and default 

gateway of your adapter.

After you install your new D-Link wireless adapter and have established a wireless connection, by default, the 

TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e., router) automatically. To verify your 

IP address, please follow the steps below.