Danby DWM5500W Manuale Utente
OPERATING INSTRUCTIONS
Instructions for Use
13
Water plus Switch
Washing under programs for regular
laundry (programs A and B) is carried out
with a low water level; the quantity of water
with a low water level; the quantity of water
is automatically adjusted to the amount of
laundry. This guarantees successful and
economic washing, regardless of the amount of
laundry.
When washing heavily soiled laundry the
water level can be increased by pressing this
switch.
It is impossible to change the water level in
programs for delicate linens and woolens.
laundry. This guarantees successful and
economic washing, regardless of the amount of
laundry.
When washing heavily soiled laundry the
water level can be increased by pressing this
switch.
It is impossible to change the water level in
programs for delicate linens and woolens.
Extra Rinse Switch
All washing programs are designed for
optimum water usage, during both washing
and rinsing cycles.
optimum water usage, during both washing
and rinsing cycles.
If you are allergic to washing agents, use the
extra rinsing cycle. This switch is operating only
with the programs for regular laundry (A-F) and
can be switched on at the beginning of the wash
program or prior to rinsing.
extra rinsing cycle. This switch is operating only
with the programs for regular laundry (A-F) and
can be switched on at the beginning of the wash
program or prior to rinsing.
Prepare your machine for washing
− Select laundry and load a suitable amount.
− Close the door (push it towards the machine).
− Fill the dispenser (in the correct sections).
− Check water inlet and outlet.
− Choose the right program.
− If your machine is equipped with switches, use
− Close the door (push it towards the machine).
− Fill the dispenser (in the correct sections).
− Check water inlet and outlet.
− Choose the right program.
− If your machine is equipped with switches, use
them, as appropriate.
− Select the washing temperature and spinning
speed, if your washing machine is equipped
with this option.
with this option.
− Switch the machine on.
After Washing
− Switch off the machine (the control lamp turns
off).
− Check that the washing is finished and that
water is pumped out of the machine to avoid
unnecessary flooding. If there is still water in
the machine, select one of the programs for
pumping or spinning.
unnecessary flooding. If there is still water in
the machine, select one of the programs for
pumping or spinning.
− Some two minutes after the washing is finished
you can open the door.
− Take the laundry out of the machine and turn
the drum once or twice by hand to make sure
no articles remain inside .
no articles remain inside .
− Check the rubber gasket on the door and
remove objects that might have deposited
(buttons, pins..) (fig. 14).
(buttons, pins..) (fig. 14).
− Leave the door open and allow the interior to
dry.
− Disengage any pushbuttons you used.
− Close the water taps.
− Check the dispenser and clean if necessary
− Close the water taps.
− Check the dispenser and clean if necessary
and dry it well.
− Check and clean the lint filter regularly.
14