Garmin Vector S Manuale Proprietario

Use a coin to twist the cover clockwise back into place, 

making sure the arrow points to locked.

Wait 10 seconds.

After you replace the pedal pod battery, you must set the 

installation angle on your Edge (

Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while 

pairing.

Turn on the Edge device.

From the home screen, select   > Bike Profiles.

Select a profile.

Select  .

Enable the sensor, and select Search.

Rotate the crank arm a few times.

When the sensor is paired with your Edge device, the sensor 

status is Connected. You can customize a data field to display 

Vector data.

The crank length is often printed on the crank arm.

Rotate the pedals a few times in order to activate Vector.

From the home screen, select   > Bike Profiles.

Select a profile.

Select Crank Length > Manual.

Enter the crank length, and select  .

Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while 

pairing.

Turn on the Edge device.

Select MENU >   > Bike Settings > Bike Profiles.

Select a bike.

Select ANT + Power > Power Meter > Yes.

Rotate the crank arm a few times.

Select  .

When the sensor is paired with your Edge device, a message 

appears, and   appears solid on the status page. You can 

customize a data field to display Vector data.

The crank length is often printed on the crank arm.

Rotate the pedals a few times in order to activate Vector.

Select MENU >   > Bike Settings > Bike Profiles.

Select a profile.

Select Bike Details > Crank Length > Custom.

Enter the crank length, and select  .

Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while 

pairing.

Turn on the Edge device.

Hold MENU.

Select Settings > Bike Settings.

Select a bike.

Select ANT + Power.

Enable the sensor, and select Search.

Rotate the crank arm a few times.

When the sensor is paired with your Edge device, a message 

appears, and 

 appears solid on the main menu. You can 

customize a data field to display Vector data.

The crank length is often printed on the crank arm.

Rotate the pedals a few times in order to activate Vector.

Hold MENU.

Select Settings > Bike Settings.

Select a bike.

Select Bike Details > More > Crank Length > Manual.

Enter the crank length.

This procedure contains instructions for the Edge 500 device.

Hold MENU.

Select Settings > Bike Settings > Data Fields.

Select a page.

Select the number of data fields to appear on the page.

Select a data field.

Bring the fēnix device within 3 m of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while 

pairing.

Hold UP.

Select Settings > Sensors > Add New > Power.

Rotate the crank arm a few times.

Select your sensor.
When the sensor is paired with your fēnix device, the sensor 

status changes from Searching to Connected.

Hold UP.

Select Settings > Apps > Bike > Data Screens.

Select a screen.

Select a data field to change it.

The crank length is often printed on the crank arm.

Rotate the pedals a few times in order to activate Vector.

Hold UP.

Select Settings > Sensors.

Select your sensor.

Select Crank Length.

Enter the crank length, and select  .

Before you can pair ANT+ sensors, Bluetooth

®

 wireless 

technology must be turned off.

6

Other Compatible Devices