BMW 2011 135i Coupe Manuale Proprietario
Replacing components
134
Xenon headlamps
Parking lamps, roadside parking
lamps, daytime running lights
lamps, daytime running lights
H8 bulb, 35 watts
The figure shows the right-hand headlamp.
1.
Remove the headlamp cover.
2.
Turn the bulb, see arrow, and remove it.
3.
Pull off the connector and replace the bulb.
4.
Attach the connector, insert the bulb and
turn it all the way in the opposite direction.
turn it all the way in the opposite direction.
5.
Attach the headlamp cover.
Corner-illuminating lamps
H3 bulb, 55 watts
The figure shows the right-hand headlamp.
The figure shows the right-hand headlamp.
1.
Remove the top headlamp cover, using the
screwdriver to push the detents to one side.
screwdriver to push the detents to one side.
2.
Turn the bulb holder, see arrow, and
remove it.
remove it.
3.
Slide the bulb out of the holder and pull off
the connector.
the connector.
4.
Replace the bulb and attach the connector.
5.
Insert the bulb holder and turn it all the way
in the opposite direction.
in the opposite direction.
6.
Attach the headlamp cover.
Turn signals, front
PY21W bulb, 21 watts
The turn signal bulb can be changed via a cover
in the wheel arch.
The turn signal bulb can be changed via a cover
in the wheel arch.
1.
Turn the respective wheel inwards.
2.
Using a coin, turn both locks of the cover all
the way to the left, arrows
the way to the left, arrows
1, and remove the
cover.
3.
Turn the bulb holder to the left and remove
it, arrow
it, arrow
2.
4.
Apply gentle pressure to the bulb while
turning it to the right for removal and
replacement.
turning it to the right for removal and
replacement.
5.
Insert the bulb holder and lock it by turning
it to the right.
it to the right.
6.
Attach the cover by positioning the bottom
edge first and then turning both locks all the
way to the right.
edge first and then turning both locks all the
way to the right.
Online Edition for Part no. 01 41 2 604 079 - © 02/10 BMW AG