BMW 2011 328i Coupe Manuale Proprietario

42

1.

Switch on radio readiness or the ignition, 
refer to page

.

2.

Adjust the seat and exterior mirrors to the 
desired positions.

3.

Press the 

button.

The LED in the button lights up.

4.

Press the desired memory button 

1 or 2: the 

LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.

Do not call up the memory while you are 
driving; otherwise, unexpected seat 

movement could result in an accident.

<

1.

Unlock and open the driver's door or switch 
on radio readiness, refer to page

2.

Briefly press the desired memory button

or 

2.

The adjusting procedure is halted immediately 
when you touch a seat adjustment switch or 
one of the memory buttons.

1.

Close the driver's door and switch the igni-
tion on or off, refer to page

2.

Press the desired memory button

1 or 2 

and keep it pressed until the adjustment 
process has been completed.

If the 

button was pressed accidentally:

Press the button again; the LED goes out.

The driver's seat position last set is stored for 
the remote control currently in use.
You can select whether or not the seat is reset 
to that position automatically.

When this Personal Profile function is 
used, first make sure that the footwell 

behind the driver's seat is free of obstacles. 
Failure to do so could cause injury to persons or 
damage to objects as a result of a rearward 
movement of the seat.

<

The adjusting procedure is halted immediately 
when you touch a seat adjustment switch or 
one of the memory buttons.

For operating principle refer to page

1.

Lightly push button

1 in the turn indicator 

lever up or down repeatedly until the sym-
bol appears in the display accompanied by 
the word "SET".

2.

Press button 

2.

3.

Lightly push button

1 in the turn indicator 

lever down repeatedly until the symbol 
appears in the display.

4.

Press button 

2.

Online Edition for Part no. 01 41 2 604 304 - © 02/10 BMW AG